As a fishing enthusiast, when you are out shopping for an expensive casting or spinning fishing rod, it helps to understand the difference between the two variants so that you can make informed decisions. The fishing rod you choose is important enhance the performance of the composite fishing equipment that you use and a perfect match between the rod and reel is the first step in this direction. The choice of fishing rods is largely between a baitcaster and a spinning rod. These two variants are significantly different from the other and it helps to understand the drawbacks and benefits of each of them so that you can determine what is best suited for you. Other than having carefully selected the best fishing rod that best suits the Australian conditions, it also helps if you use fish finders and depth finders for the first few weeks.
If you are a beginner, you should also know that fishing rods made for baitcasting reels and spinning reels have definite differences and your preference largely determines the combination you wish to buy. For beginners, in particular, spinning set up calls for minimal learning curve while the baitcasting rods do need a more focused learning but the benefits far outweigh the challenges during the training.

Understanding a spinning rod

When a fish is pulling on your fishing line, the spinning rod bends, due to the force of the pulling, and all eyelets are pointing down. The spinning reel is suspended beneath the rod and typically, the handle is on the weaker hand of the angler. Therefore, a fisherman who is right handed will have his strong arm firmly on the spinning rod while the reel is operated with his left hand. Spinning rods come in different sizes and types. You can choose between light action/ medium heavy/ or heavy spinning rod depending on your personal preference and deployment.

Spinning rod – advantages and disadvantages

As mentioned above, spinning rod makes it easier for beginners to go fishing since it has a spinning reel. Many of the baitcasting reels presently available in the market use centrifugal or magnetic cast controls. At times, this can cause some amount of frustration since learning curve necessary can impact your fishing time. Anglers hold the spinning line against a spinning rod with the index finger. The bail is then flipped to free the line and get it ready for casting. At the right moment of propulsion of the rod, the line is relaxed to allow the bait or lure to fly. On completion of the cast, the fisherman will either flip the reel back using his hand or start reeling so that the bail can be flipped. An angler is never worried of the line once he lets the line go off and till completion of the cast. That brings us to the question why every fisherman does not use the spinning reel and rod. The simple answer is that the casting set up has several benefits although it is tougher to master. Baitcasting spools also allow the line to come off naturally and straight opposed to the spools of the spinning reel that often tends to twist the line.

Understanding the casting rod

The working of casting rods is exactly opposite the working of spinning rods. When a fish pulls on the line feed through the casting rod, the rod bends and the eyelets are facing up. For anglers used to spinning rods only, this could perhaps seem pretty unnatural, though the casting rods use the eyelets more effectively.

Advantages and disadvantages of casting rods

The advantages and disadvantages of a casting rod is a direct comparison with the spinning rods. For anglers who are not initiated with the casting rod can find it a big challenge learning to use the casting rod. The line will keep backlashing inside the casting reel till the learning curve is completed. The learning curve may also involve more frustration since the line may need frequent change with associated expenses. But, once the learning curve is successfully completed, the advantages of the casting rod will begin to show up in comparison to the spinning setup. The eyelets on the casting rod get pushed by the line and force them into the rod opposed to being pulled away from the rod in the case of a spinning reel. Likewise, the eyelets are unlikely to break due to the force when you use casting rods since the casting rod supports them.
Casting reels help the line to roll from the spool while on a spinning reel, the line comes up off the spool lip. Consequently, friction is created against the lip and the line of the spool slowing each cast prematurely. Baitcasting reels, on the other hand, rolls smooth and with practice, an angler learns to get significant casting distance.


In many ways, baitcasting rods offer significantly better performance in comparison to the spinning rods. However, this does not mean that you cannot expect value and high performance from spinning rods. For beginners, the spinning rods are a better choice because of the experience it can provide. Once the anglers have gained adequate experience with the spinning rods, they can switch to the casting rods for better value for money. Most of the advanced anglers have started their journey with spinning rods and moved up to casting rods later on their path. Further, advanced technology ensures that spinning rods deliver significantly enhanced performance and anglers who are just about beginning their fishing journey would hardly get to notice any major difference. As with most other sports and hobbies, knowledge is a powerful tool that can enhance your experience as well as the outcome.

Leave a Reply

Your email address will not be published. Required fields are marked *